Insulated Rolling Shutter
These shutters
offer a good level of insulation and are ideal for securing warehouses,
workshops, or storage facilities. Also available with fire resistance ratings
of up to 4 hours for compartmentalisation purposes where fire resistance integrity
is required. We only offer these shutters as high-speed versions. This ensures
that they work effectively as insulated energy saving doors. We do not supply
insulated doors with any drive other than a high speed one.
Closing speed: User variable to suit application.
Frame: Galvanised mild steel endplates welded to heavy-duty galvanised side frames with an option of stainless steel
Standard colour: Bright galvanised finish
Special colours: according to RAL (optional) or plastisol sheet (Standard Corus colour range)
Thermal conductivity (panel): U-Value: 1.4 W/m2 K
Insulation: 20mm thick CFC free polyurethane
Lath joints: Interlocked 'nip free' construction securing each lath
Operation: Maintenance-free side guide system with plastic brush lined guides
Key Features:
Opening speed: Up to 0.5 m/sec.Closing speed: User variable to suit application.
Frame: Galvanised mild steel endplates welded to heavy-duty galvanised side frames with an option of stainless steel
Technical Data:
Lath dimensions: 75mm x 20mmStandard colour: Bright galvanised finish
Special colours: according to RAL (optional) or plastisol sheet (Standard Corus colour range)
Thermal conductivity (panel): U-Value: 1.4 W/m2 K
Door Panel:
Lath skin: Galvanised steel sheet profileInsulation: 20mm thick CFC free polyurethane
Lath joints: Interlocked 'nip free' construction securing each lath
Operation: Maintenance-free side guide system with plastic brush lined guides
Controller: We will only sell this insulated product with a high speed micro-processor based operator, after all what's the point of having an insulated door if you are running at standard shutter speeds and leting all the warm air tumble out.
Local controls: Keypad on control panel fascia with "Open, Stop and Close", E-stop pushbutton - twist to reset, panel interlocked mains power isolator with padlockable facility. Volt free contacts for door open and closed. Variable time delay open facility between 1 and 300 seconds. Direct LCD plain English diagnostics display.
Extendability: Prepared to accept a multitude of inputs from induction loop detectors, motion detectors, pull cords, pushbuttons etc.
Cabinet: Available in stainless steel as an option
Local controls: Keypad on control panel fascia with "Open, Stop and Close", E-stop pushbutton - twist to reset, panel interlocked mains power isolator with padlockable facility. Volt free contacts for door open and closed. Variable time delay open facility between 1 and 300 seconds. Direct LCD plain English diagnostics display.
Extendability: Prepared to accept a multitude of inputs from induction loop detectors, motion detectors, pull cords, pushbuttons etc.
Cabinet: Available in stainless steel as an option
Motor gearbox: Specifically designed for use on high speed doors with an integrated safety gear with anti-fall device built in.
Gearbox features: Robust low maintenance drive unit with integrated limit switches for end point positioning. Self adjusting motor brake with universal mounting either right hand or left hand of the door. Manual operation from ground level via the integrated chain hoist for emergency operation.
Gearbox features: Robust low maintenance drive unit with integrated limit switches for end point positioning. Self adjusting motor brake with universal mounting either right hand or left hand of the door. Manual operation from ground level via the integrated chain hoist for emergency operation.
Drive: The door is equipped with a chain hoist as standard equipment. On power failure the chain hoist can be engaged using the low level selector chains. The door can then be opened and closed with the chain hoist.
Optical safety: The door area is monitored by a retroflective polarised light barrier (IP 67).
Safety edge: The leading bottom edge of the door is equipped with a self-monitoring contact strip to protect personnel or the door if it comes into contact with an object.
Operation in failure mode: The door control automatically switches to deadman's operation when a safety device fails.
Standards: The door complies with the requirements of EN 12453.
Safety edge: The leading bottom edge of the door is equipped with a self-monitoring contact strip to protect personnel or the door if it comes into contact with an object.
Operation in failure mode: The door control automatically switches to deadman's operation when a safety device fails.
Standards: The door complies with the requirements of EN 12453.